Year: 1969-70 Condition: Reproduction Description: Convertible Trunk Divider with Well Liner Application: Mustang/Shelby all Finish: Divider Board: Black semi-gloss black (trunk side). Well Liner: Black vinyl. Part #: Engineering #: Date Code: none Jack's Comments: All Mustang and Shelby convertibles used this trunk divider board and well liner combination in 1969 and 1970. Unlike the 67-68 trunk divider that screwed to the trunk floor the 69-70 version was stitched to the bottom of the well liner. Held in position by the stitching on the bottom and gravity resting the top of the divider on the trunk lid hinge spring, it was a good clean looking fit. The relief on the bottom was there so you could swing the divider forward to have access top pump and possibly to gain you a tad more trunk room when the top was up.
We used several verified original 1969-70 convertible trunk dividers including the one in my car to develop this reproduction. We are particularly proud of this product because it’s such a good Dead Nuts On copy. The board material is just like the originals in color, finish, thickness and water resistant coating on the side facing the well liner. We reproduced the seam used at the top of the board to help maintain the boards shape and stitched the board onto the best quality well liner available. During our research we discovered the divider board was painted black then stitched onto the well liner backside up so this caused the needle to break the board material a little when it punched through the board. Getting all the details right is what we enjoy. Here are some more pictures our trunk divider. Picture 1Picture 2Picture 3
Related Pictures: More Info or Links: Shipping: UPS Ground (oversized package)
