Engine: 390, 427, 428PI, 428 CJ
Casting: C2AE-8505-A, C4SE-8501-A, C4AZ-8501-A, C4AZ-8501-B, C4AZ-8501-C, C5AE-8505-A, C6AE-8505-B, C8AE-8505-A, C8AE-8505-H, C9AE-8505-A, D4TE-8505A2-A
Turn around Time: 7-10 business days
Shipping Information: Return shipping included*
Our water pump rebuild service includes new bearing, seal (new double seal version), fan hub and replacement of bypass tube. We start with disassembly and inspecting the pumps condition. The bare housing is then hot tanked and sand blasted to remove paint and rust. We paint the housing with gray primer then we install a new bearing, seal, hub and bypass tube. If your original impeller is bad or gets damaged during disassembly we will install a new stamped steel impeller for no charge. Then the rear cover is sealed with a new gasket. Finally we carefully package your water pump and ship it back to you via UPS Ground or USPS Priority Mail for international customers.
Special Requests: If you have any special instructions like "Rebuild my pump and don't remove the existing paint finish". Just type your request in the special instructions box above the big Add To Cart button.
Ready for us to rebuild your water pump? Follow these steps:
Step 1: Complete the purchase of your rebuild service online. (You can also call or email us to place your order)
Step 2: Ship your water pump to the address below. Make sure to include your contact information or print your paid online order invoice.
Dead Nuts On
1033 N Fulton St
Fresno, CA 93728
Shipping Tip: We recommend reinforce and pad any box you use and insure the pump for what you think its replacement value is.
Step 3: When your water pump arrives we will inspect it and contact you to let you know we have your pump and if there is any condition issues.
Step 4: We rebuild your water pump and ship it via UPS Ground to the address you specified. We will email you a UPS or USPS tracking number the same day its shipped.
Step 5: Install your water pump and enjoy your car.
*Return shipping included in the price for lower 48 United States only. Contact us if you are outside the USA for a return shipping quote.
Questions and Answers:
Q: Do I get my the same water pump I send you back?
A: Yes, we track the pump you send us all the way through the rebuilding process so we can guarantee you will get your pump back.
Q: What should I insure the pump for when I'm sending it to you?
A: You should insure it for the what you think the pump would cost to replace. If you need help with this email us.
Q: Will you replace the heater hose tube that screws into the pump?
A: No, we will not replace or replate this screw-in heater hose fitting. Please remove it before shipping it to us.
Q: Will the fan hub be replaced as part of the rebuild service?
A: Yes, but only if its bad since new hubs are a slightly different from originals.
Q: My pump has a backing plate. Will your replace it if its rusted out.
A: We will contact you if we think your backing plate is no longer serviceable. We have new replacement backing plates if you need one. We also have the special bolts for the backing plate available. If you purchase the bolts along with the rebuild service we will install them and return your old ones with your pump.
* Free return shipping via UPS or USPS Priority Mail is only available in the United States. Please contact us for an exact shipping quote if your outside of the United States.