Description: Convertible Trunk Divider Board with Hardware
Year: 1967-68
Model: Mustang, Shelby
Divider: Black board
Hardware: 4 x Semi-flat black self-taping Philips screws with large pan head

Accuracy Rating: 9
Best Repro Available: YES

Jack's Comments:

We used a verified original 1967-68 convertible trunk divider to come up with this near Dead Nuts On reproduction. The board material is the same thickness as the original but is solid black vs the brown board. We accurately reproduced the rib used to control the mounting tab bend so it looks and performs as it should when installed. Mounting screws included. Board comes unpainted (see notes below).

Concours Notes:
1) Most MCA Gold judges I’ve talked to agree that the trunk mat ends in front of the dividers rib. Others say mount the divider on top of the trunk mat.
2) Correct finish is semi-gloss paint on the trunk facing side only (not applied). Oil based paint is best.