Description: Power Steering Hose Ram > Valve Body
Model: Mustang, Shelby, Cougar
Engine: 289, 289HP, 302, 351W, BOSS 302, 390, 428 CJ, 428 SCJ, BOSS 429
Engineering #: C6OZ-3A717-A
Service #: C6OA-3A717-A
Date Code: None
Accuracy Rating: 9
Best Repro Available: YES
This is the latest Concours reproduction of one of the two short power steering hoses that connect the hydraulic ram to the valve body. It has the unique single crimped fitting used from 1967-69, zinc plating, hose markings and die stamped engineering number.
This hose cost a lot more than a regular service hose but its the only one on the market that fit, function and look just like factory hose.
CAUTION: This hose has to be installed in the correct port on ram and valve otherwise the steering wheel will violently rotated back and forth when started. Refer to the 1969 chassis assembly manual page 79 for proper installation. Ford Shop manuals also describes how to properly install this hose.
Q: What make this hose not exactly like a production hose?
A: Doesn't have the tiny FORD oval logo stamped next to the engineering number.
Recommended Power Steering Fluid:
WARRANTY 90 DAYS FROM DATE OF SALE, Blue Dot Specialties' warranty is expressly limited to the repair or replacement of defective parts EXCEPT AS SET FORTH HEREIN. Blue Dot makes no warranty of merchant ability or fitness for a particular purpose or other warranty (whether express, implied or statutory). Blue Dot shall not, under any circumstances be liable for incidental, consequential or other damages, loss of profits or expenses in connection with or by reason of the use or inability to use goods purchased for any purposes.