Description: Ribbed Rear Axle Vent Hose with Concours Correct Hardware
Year: 1968-71
Model: Torino, Cyclone, Fairlane, Falcon
Model Options: All
Engine: All
Transmission Type: All
What you get: 23" ribbed vent hose, strap clamp (zinc/vinyl coated), pinch clamp & clamp bolt (phosphate)

Accuracy Rating: 10
Best Repro Available: YES

Jack's Comments:

This is one of our newest reproduction hoses. It's an exact copy of the an original in every way including the ribbed exterior wall, hose thickness and rubber durometer (rubber hardness).  Unlike other reproductions this hose will not pinch and restrict because its made with the correct rubber and hardness (see third picture of me bending the hose).  The NOS (service part) axle hoses kits you see on eBay every so often don't have the ribbed outer wall so they are not correct. You will need a crimp clamp tool to properly install the axle vent clamp.

Note 1: This hose varied in its outside diameter ever so slightly and how pronounced the ribs showed during its decade of production.
Note 2: The bolt supplied with this kit the same as the production originals.  We have found many head markings but the bolt type is always the same so we suspect Ford changed from supplier to supplier for this bolt.  We have seen the following head markings: 23, C, Anchor.  The bolt supplied with this kit has an anchor head marking. 
Note 3: The yellow paint dab is normally around the location of the strap. This would help the assembly line workers quickly locate the correct install location.